Replace all gaskets, O-rings, C-clips and cotter pins
when performing maintenance on the scooter. Nuts and bolts on all engine
covers should be tightened in a diagonal pattern to uniformly distribute
clamp force.
.
Use lubricants recommended by your scooter manufacturer
to assure peak performance from the scooter
Clean and lubricate all engine parts during the
disassembly and reassembly process to prevent damage to the engine.
When performing maintenance on the scooter make sure
that all moving parts and controls move freely and return to their proper
position.
When connection the battery always connect the positive
terminal first.
Make sure that tools and service equipment do not come in contact
with both battery terminals.
When disconnecting the battery always disconnect the
negative terminal first.
Cover both battery terminals with a light coat of grease to prevent
corrosion.
When replacing fuses always use an exact replacement.
Do not use fuses of a higher rating.
Replace all rubber caps on wire connections after
performing maintenance.
When disconnection wire connectors press firmly on the
locking tab and pull the body of the connector. Never pull on the wires.
When assembling wire connectors press
firmly to assure the lock tab fully engages.
Bulbs
Cables
CVT
Transmission Parts
Electric
Starters For GY6 Engine
Gas
Line & Filters
Gaskets
For GY6 Engine
Horns
Ignition
Coils 2 Stroke
Ignition
Coils & CDI 4 Stroke
Ignition
Switch & Lock Kits
Mirrors
Mufflers
for GY6 Engine
Shocks
Start
Relay For GY6 Engine
Stator
Coils for GY6 Engine
Switches
Tanks
& Gas Caps
Tires,
Tubes, Rims and Wheels
Tools
& Testers
Turn
& Stop Light Assemblies
